Windsor 1.005-294.0, Operating Instructions Manual, Page: 14 / 53

14
Operation
Pre-Run Inspection
Before each use inspect the accessory such as the pad
driver for cracks, tears or excess wear. If the machine
or accessory is dropped, inspect for damage to install
an undamaged accessory.
Repair the damaged machine before the next applica-
tion.
When inserting the bottle, push the container down until
it rests firmly.
Choose a pad for the appropriate application. Place the
pad in front of the machine on the floor and center the
driver plate on the pad.
To place the driver plate on the pad, position the handle
in a lower position.
Lift the machine until the wheels slightly come off the
ground and push slowly forward until the machine base
tilts towards the ground.
86375030 Manual