Windsor 1.005-294.0, Operating Instructions Manual, Page: 18 / 53

18
Operation
Process of Cleaning
For effective floor cleaning, move the machine forward and backwards.
We recommend you to wet the floor as you move the machine forward, releasing the spray button when you move
the machine backwards.
To increase the pressure and cleaning effect on certain floors like tile and grout, you can lift the machine frame up,
raising the wheels off the ground. When lifting the wheels off the ground the full weight of the machine lies on the
machine base.
Make sure the surface to be cleaned is not damaged by the increase in pressure.
Assurez-vous que la surface à nettoyer n'est pas endommagée par l'augmentation de la pression.
Omit this measure on very sensitive floors.
End of the Application
Turn off the machine by putting the on/off switch to “O”.
If you used a cleaning solution, rinse the pump system with clear water. Install a bottle filled with clear water in the
cage holder. If you do not have an open area to spray and rinse the pump, we recommend placing an absorbent
pad on the floor in front of the spray jets and directly spray onto it. Press and hold down the spray button until the
water is totally clear.
Omitting this rinsing process can lead to internal hose, filter, and/or pump damage.
Omettre cette opération de rinçage peut se traduire par des dommages au tuyau interne, au filtre ou à la pompe.
86375030 Manual