Windsor 1.005-294.0, Operating Instructions Manual, Page: 19 / 53

19
Operation
Storage
To store the base in the upright position, press down
the handle frame with the right hand and lift up the base
with the left hand by grabbing the base handle.
The machine base should now rest on the black
bumper foot, located at the back of the bumper. To
avoid damage to the handle frame, DO NOT lay the
machine frame on the floor as done with other tradi-
tional cleaning equipment.
Remove the pad from the driver plate by pulling it down
firmly.
Put the machine frame in an upright position by pulling
the black knob with the left hand and move the handle
frame upwards with the right hand. The black knob
should lock firmly in the top hole.
Always remove the power cord from the electrical outlet
before disconnecting it from the machine
!Retirez toujours le cordon d'alimentation de la prise
électrique avant de déconnecter l'appareil!
To allow an easy transportation of the machine, remove
the water bottle and the weight kit if used.
To easily roll the machine, create a leverage effect by
pushing your foot on the back wheel axle and pull the
handle towards your body. The machine can be moved
similar to a dolly now.
Always store with the base in the upright position.
For storing in tight spaces, we recommend that you fold
down the handle frame. Open the round screw knobs
on the upper latch brackets by turning them counter-
clockwise.
Fold down the loosened screw caps. The handle can
now be folded down
86375030 Manual