WindSonic Doc No 1405 PS 0019 Issue 25 February 2017
42
To change a setting i.e. change from M2 (Polar) to M1 (UV), select M1 from the Wizard
drop down list then click on Next.
The following screen will show settings that will be changed.
Then click on Next.
Wind will report Setting Up Anemometer and then re-start the anemometer scrolling data in
UV mode.
Note: - It is also possible to change settings in Wind using the Configuration Mode
operation and using Commands listed in Para’s 10.4 to 10.7.1.
WindSonic Doc No 1405 PS 0019 Issue 25 February 2017
43
10.2 WindView
Gill WindView software is available on the supplied CD or as a download, free of charge
from the Gill Instruments Limited website
http://gillinstruments.com/main/software.html
WindView features include: -
Data Display
Data Logging
NOTES:
WindView cannot be used to change the WindSonic configuration.
WindView is not compatible with WindSonic Option 4 – SDI-12 or WindSonic units prior
to serial number 08100001 with a yellow or blue tab adjacent to the North Marker.
Open Gill WindView software program.
Select File/Connect as follows:-