Wincor Nixdorf TH250, Programmer'S Manual

Page: 40 / 182

TH250 Programmer’s Guide
35
n = 00 will cause 1B 72 00 to print red and all other values to print black.
This command defines how to interpret the 1B 72 command for legacy environments. It provides a
method to resolve any differences in the definition of command 1B 72 between the Native mode
and earlier implementations in other printers.
In Native mode, the standard “Set current color” command should be used.
Related information
The 1F 03 16 00 command disables this.
Set timeout value for low-power idle state
ASCII US ETX ll hh
Hexadecimal 1F 03 3C ll hh
Decimal 31 03 60 ll hh
Value of ll : low byte of time in seconds
Value of hh : high byte of time in seconds
This command sets the timeout value in seconds. If the printer has not received data for that
amount of seconds, it will shutdown to the low-power (1 watt) state. A value of
ll hh = 00 00
disables this feature. To bring the printer out of the low-power idle state, press the paper feed
button.
Note: shutdown mode (1F 03 54 00 n) must be enabled for this to work.
Set printer into low-power idle state
ASCII US p
Hexadecimal 1F 70
Decimal 31 112
This command puts the printer in the low-power (1 watt) state immediately. To bring the printer
out of the low-power idle state, press the paper feed button.
Note: shutdown mode (1F 03 54 00 n) must be enabled for this to work.
Print test form
ASCII US t
Hexadecimal 1F 74
Decimal 31 116
Prints the current printer configuration settings on the receipt.
Disabled in page mode.
Port Idle Timeout
ASCII US ETX 0x4E n1 n2
Hexadecimal 1F 03 4E n1 n2
Decimal 31 03 78 n1 n2
Value of n : n1 : low order byte of seconds
n2 : high order byte of seconds
Default: disabled