Wincor Nixdorf CMD-V4, Service Manual, Page: 115 / 234

Device Overview and Operation Determining the reference value
01750060162 A Cash Media Dispenser Version 4 - Service Manual
3-33
•
Holding the green locking handle, pull out the CMD-V4 as far as possible
(see chapter "Removal/Installation of Components", section "Pulling out /
pushing in the CMD-V4").
i
If the locking handle jams and you cannot pull out the CMD-V4, you
should always see the chapter "Troubleshooting".
Remove the dispensed banknotes
from the clamp stacking position and
count them.
The number of dispensed banknotes
must be the same as the one indicated
by the system. If this is not the case,
you will have to repeat the whole
procedure for determining the
reference values.
Place the counted banknotes back in
the clamp stacking position.
•
Push the CMD-V4 as far as possible into the safe.
•
Wait until the CMD-V4 is ready.
•
After the CMD-V4 has powered up, the cash in the stacking position is
transported to the reject / retract cassette.
•
Select the next cash-out cassette using the product-specific software or
quit the function for setting the reference value.
•
Close the safe door (see the operating manual of the basic device).