Copyright 2014, WINCO MFG., LLC
7
6
ASSEMBLY INSTRUCTIONS
BACK ASSEMBLY INSTRUCTIONS:
4. Hold the rear apron up, exposing the mounting brackets (A). Lift the
upholstered back by its sides while aligning the mounting brackets
with the recline mechanism (B).
WARNING:
•
Keep hands clear of connection points or injury may occur
IMPORTANT:
•
We recommend two people be used for step 4
•
Be careful not to tear or puncture vinyl.
5. Slide the back onto the recline mechanism until the middle hole of
the mounting bracket (A) is aligned with the middle hole of the recline
mechanism (B).
6. Install knobs (A) (tethered to back) and tighten to a secure fit.
7. Ensure that the rear apron rests OVER the rear brace of chair.
IMPORTANT:
•
Test to ensure the back has been properly installed by pulling up
on the back. The back should remain securely in place.
5
7
4