Copyright 2014, WINCO MFG., LLC
12
OCCUPANT OPERATING INSTRUCTIONS
RECLINE WHILE IN THE SEATED POSITION:
1. While seated in the chair, pull back on either of the recline levers (A),
located on either side of chair, to activate the legrest into the recline
position.
NOTE:
Activate the legrest by pulling the recline lever (A) 1/2 way
out. To recline the back, fully extend the recline lever (A).
2. To operate the infinite back positioning, pull back on the recline lever
and adjust the upholstered back angle by pushing back with your
body until desired angle has been reached.
Release recline lever (A) when you have achieved the desired angle
to lock the back into position.
WARNING:
•
DO NOT push or pull legrest to maneuver chair.
•
DO NOT stand or sit on the legrest.
•
DO NOT place hands, legs, or feet under seat, mid-ottoman, or
legrest.
•
Stay clear of recline mechanism when operating chair.
2
1
RETURN TO THE SEATED POSITION:
1. To return the back to the full upright position pull back on either of
the recline levers while sitting upright in the chair.
Release the recline lever once the back has fully returned to the
upright position.
NOTE:
To return the back to the upright position, fully extend the
recline lever (A). Once the cack is returned to the upright position,
release the handle and push the legrest closed.
2. Press down on the legrest with legs/feet until it locks into place.
NOTE:
The recline lever does NOT have to be used to return legrest
to its stored position.
A
A
1
A
2