manualshive.com logo in svg

Winbook 486 SLC, Manual, Page: 56 / 66

Share
Download
Winbook 486 SLC Manual Download Page 56

The Main system ROM may also be shadowed as explained above. Shadowing the main system
ROM will result in improved performance. 

Set Display Type

 

This item has a choice of three options: LCD, Auto and SimulSCAN. Select LCD to use the
built-in LCD display; select Auto to allow use of the LCD display for normal usage and automatic
switching to an external CRT if one is connected; select SimulSCAN to allow simultaneous
viewing of the LCD and CRT display. 

Set Automap or Attribute

 

Retain the default setting for this item. 

Power Management

 

Select 

POWER MANAGEMENT SETUP 

in the main menu make various settings to maximize

power usage. If you wish to take advantage of these features, you must select 

Enabled 

for the first

item, Power Management. When this item is enabled, you may then proceed to make the settings
according to your requirements. 

Figure 8-5 the Power Management Screen

 

Serial Port 1,2 Timeout

 

Enter the amount of time of non-usage after which you wish power to the serial port to be shut off.
For example, if you enter 10 (seconds), then if the device connected to 

serial port 1 is not used to 10 seconds, power to the serial port will be shut off. As soon as the
device is used, power will automatically be restored. 

Parallel Port Timeout

 

7 of 11

3/2/99 10:08 AM

SLC Chapter 8

file:///C|/test/HtmlHelp/SLC Chapter 8.htm

Summary of Contents for 486 SLC



































































Reviews:

No comments