(1) PC Audio In
This input is for connecting the audio cable from the audio-out connection on computer.
(2) Audio In (optional)
This input is for connecting the audio cable from the audio-out connection on VCD or D
VD.
(3) VGA Signal Connector
This input is for connecting the 15-pin D-sub VGA signal cable from computer.
(4)Knob
This knob can turn on/off built-in speaker and can adjust volume.
(5) Power Connector
This input is for connecting the power cable from the A C/DC adapter through DC 12 V
cable.
Video In (optional)
This input is for connecting the Video cable from the Video-out connection on DVD
or VCD.
S-video In
Connect the Video equipment with S- Video into this input by S-video cable.
TV system port(optional)
Using coaxial-cable with 75 ohm to obtain radio signal or TV cable signal.
If there is any technical change, we will not inform.
3. Connection with External Equipment
Note: Please be sure the AC power to your computer is turned off before connecting or
disconnecting any display peripherals. Failure to do so may cause serious personal
injury as well as permanent damage to your computer equipment.
Connect 15-pin D-sub interface cable to the computer via the video connector on the
video card, and fix it firmly with the screws provided on the plug. Plug in one end of the
audio cable to the back of the Pc. Connect the A C plug of Adapter into A C outlet.
Connectors for the signal cables and audio are located on the back of the monitor. Plug
the DC12V output of Adapter into DC12V socket. Please refer to the connector
configuration.
Page 6
