24 Washbasin fitting
WimTec SMART
Hy
Plus
EN
SMART
Hy
Plus
Function description
Continuous flow:
DIP switch 3
Enable the continuous flow function to fill the washbasin or a container.
‘ON’ position =
Continuous flow function is enabled.
‘OFF’ position =
Continuous flow function is disabled (default setting).
ON
OFF
2 3 4 5 6
1
3 x
um 07:00 Uhr
Activate continuous flow:
1.
Approach the infrared sensor with your hand
(approx. 3 cm) and dwell - the water flow starts.
2.
After the control LED flashes 3 times the continuous
flow will be activated for the set flush stop time.
Cleaning stop activated:
1.
Approach the infrared sensor with your hand
(approx. 3 cm) and dwell - the water flow starts.
2.
After the control LED flashes 5 times the water flow
stops and the cleaning stop is activated for 3 min.
3.
After further 3 times flashing the water flow starts again and
the continuous flow is enabled for the set flush stop time.
Deactivate continuous flow:
Automatic:
After the flush stop time has elapsed
(DIP switch 5, see page 26).
Manual:
1.
To instantly end the continuous flow, approach the infrared
sensor with your hand (approx. 3 cm) again and dwell.
2.
After the control LED flashes 3 times the continuous flow
is disabled and the fitting will resume normal operation.
|
um 07:00 Uhr
3x
um 07:00 Uhr