Washbasin fitting
WimTec LOFT
21
EN
LOFT
Function settings
‘ON’ position:
Standard active range (approx. 15 cm, default setting).
‘OFF’ position:
Short active range – (approx. 12 cm, for small washbasins).
Serves to disable the fitting prior to cleaning.
‘ON’ position:
Cleaning stop function enabled.
‘OFF’ position:
Cleaning stop function disabled (default setting).
Active range:
DIP switch 1
Cleaning stop:
DIP switch 2
ON
OFF
2 3 4 5 6
ON
OFF
2 3 4 5 6
1
1
3 x
3 x
5 x
um 07:00 Uhr
um 07:00 Uhr
um 07:00 Uhr
Enable cleaning stop
Approach the infrared sensor
with your hand. The sensor
LED starts flashing, and water
begins to flow from the
faucet.
After flashing 5 times, the
water flow is stopped, and
the cleaning stop is
enabled for 3 min. In this
time the LED flashes 2 times
every 3 s.
Disable cleaning stop
(automatically)
The fitting will resume normal
operation after 3 min.
Disable cleaning stop
(manual)
To instantly end the cleaning
stop, perform the same steps
used to enable the function.
After flashing 3 times the
cleaning stop is disabled.
