14 Washbasin fitting
WimTec LOFT
EN
LOFT
Congratulations on purchasing the WimTec LOFT fitting.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
WimTec LOFT HDM - with mixer:
Art.no. 121 070, 121 056
WimTec LOFT HDK - without mixer:
Art.no. 121 063, 121 049
WimTec LOFT HDVM - with hidden mixer:
Art.no. 123 913, 123 937
Delivery scope:
Tap housing with electronic module, 230 V power unit or 9 V battery,
magnetic valve, connnection hoses, dirt-filter attachment for corner
valve, mounting material and reflux preventers at variant with mixer.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and international standards and
provisions must be observed! Provide for 230 V / 12 V power unit
outside of the protected zone. Maintenance of return flow valves
according to EN 806-5.
General notes
The “General installation
terms and conditions”
provided at
www.wimtec.com apply.
!