Wilton 8014FW, Operating Instructions And Parts Manual

Page: 6 / 56

6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a Wilton Model 8014FW or 8020FW Band Saw. This manual contains instructions on installation,
safety precautions, general operating procedures, maintenance instructions and parts breakdown. This
machine has been designed and constructed to provide years of trouble free operation if used in
accordance with instructions set forth in this manual. If there are any questions or comments, please
contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web
site: www.wmhtoolgroup.com.
Specifications
Model Number ............................................................ 8014FW .................................................... 8020FW
Stock Number (220V) .............................................. 8014FW-2.................................................8020FW-2
Stock Number (440V) .............................................. 8014FW-4.................................................8020FW-4
Blade Speeds (SFPM) .................................................. 82-330 ...................... Low 65-555, High 390-3280
Height Capacity, Maximum (in.) ............................................. 8............................................................. 12
Throat Capacity, Maximum (in.) ........................................... 14............................................................. 20
Table Size (L x W)(in.) ..................................................20 x 20............................................... 24 x 22-1/2
Table Height at 90° (in.) ....................................................... 39....................................................... 39-1/2
Table Tilt (deg.) ..............................8 fwd/back, 12 left, 15 right....................... 8 fwd/back, 15 left, 15 right
Welder (KVA)...................................................................... 1.5............................................................ 4.2
Blade Length, approx. (in.)................................................. 114 .................................... 150-1/2 to 156-1/2
Blade Width (in.) ...........................................1/8 min., 1/2 max...................................... 1/8 min., 1/2 max.
Motor........................................................................ 1HP, 3Ph.................................................. 2HP, 3Ph
Floor Space Required (in.) ............................................34 x 24..................................................... 42 x 29
Net Weight (lbs.)................................................................ 580 ......................................................... 1210
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.