© by WilTec Wildanger Technik GmbH
Item 61214
–61217
Page 7
06 2021
-1
Drive off
Before each ride, please check that all screws are tight and that there is no damage to the cart.
Do not switch on the board until you are safely seated on the cart.
Brake:
Keep both levers in a horizontal position.
Reverse:
Pull both levers up to move backwards. Pay attention to your surround-
ings.
Forwards:
Press the levers down evenly to move forward.
Turn left:
Push the left lever down and pull the right lever up.
Turn right:
Push the right lever down and pull the left lever up.
•
Always pay attention to your surroundings while driving and drive at an appropriate speed.
Never exceed the recommended maximum speed of 10 km/h. Avoid any sudden steering move-
ments. Always try to operate the steering smoothly and evenly. Be ready to brake at all times.
•
Please do not ride continuously at the maximum speed of the hoverboard. Do not ride on slip-
pery, wet, or frozen surfaces. Avoid steeply sloping terrain and slopes. Always ride carefully and
smoothly on curves. You could lose your balance and injure yourself on sharp bends.
•
Only use the scooter on flat surfaces, avoid holes, grooves, and kerbs. Do not drive over loose
materials, e.g., branches, stones, grass or sand.
•
Only use the go-kart with a suitable hoverboard. Before use, make sure you have understood
the instructions for the scooter. Check that the go-kart meets the general safety requirements
before assembling it.
Cleaning and storing
•
Only clean the go-kart with a damp cloth and, if necessary, with a mild cleaning agent.
•
Store the go kart in a dry place.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.