Contact Wilson Electronics Customer Support Team with any questions
at 866-839-9361 or email: [email protected].
6
ENGLISH
antenna to the meter with the supplied
cable and adaptors, and use the
supplied mast mount as a handle for
the antenna. In this configuration, you
can now use the meter as a directional
signal finder to optimize antenna
placement.
Survey all interior spaces to locate
the areas most in need of signal
improvement and note them on your
site survey. Plan one panel antenna
per 4000 square feet of needed
coverage, barring any interior walls
or surfaces which might block signal.
Once the installation is complete,
resurvey the interior spaces to confirm
signal improvement. Note that results
will be dependent on outside cell
signal strength. Very weak outside
signal will result in less coverage area
inside.
In order to maximize your Wilson
Electronics Signal Booster coverage, the
Signal Meter can be used inside the
building to verify desired coverage area.
If it is determined that coverage is not
suf
fi
cient, follow directions for antenna
separation and ensure the Outside
Antenna is pointing at the strongest
desirable cell tower.
Signal Meter
Inside Panel Antenna
Checking Inside Coverage Area
Check inside coverage
before & after installation
of Signal Booster system.
