®
8
CLAMPS AND CLAMP BASES
The inner surface of the clamp is coated with diamond dust.
Only slight pressure on the string is needed
ENGAGING THE CLAMP AND CLAMP BASE
Position clamp on string
Push down clamp lever
Push clamp base lever clock wise until click
RELEASING THE CLAMP AND CLAMP BASE
1. Lift the clamp lever up
2. Pull the clamp down onto the base
3. Base will automatically release
If the clamp will not drop off the string push button to release
ADJUSTING THE CLAMP AND CLAMP BASE
(caution small adjustments are best)
Turn knob by clamp teeth to apply proper pressure to string.
Clamp base is factory set to proper setting.
Over time the clamp base may require adjustment.
Make slight adjustments of not more than 1/8 turn.
6.4 ADJUSTMENTS
9
ADJUSTING THE PULLER HEAD
The adjustment screw can increase or decrease the pressure
on the string in the puller head. Use this adjustment for different
string diameters.
TURNTABLE BRAKE
The brake activation handle is under the right side of the turntable.
ON
OFF