®
2
WARNINGS & PRECAUTIONS
Recommended for indoor use.
Recommended operating temperature is 10-40 °C, 50-104 °F
Keep all liquids away – risk of electrical shock.
NEVER use if SAFETY COVER is missing or loose.
Exposed moving parts could cause serious injury!
Never open Motor housing. Opening voids warranty.
Never insert fi ngers or body parts into motor housing. Cause for bodily harm!
Never service when plugged in.
Extension cords should be carefully chosen and inspected regularly. Replace rather than repair.
Wilson will not be held liable for any damage (direct or indirect) caused by incorrect
installation, poor maintenance, non-approved alterations or improper use. We will also
be not be held of liability for failure to comply with safety standards for accidents, fi re
or for the safety of electrical installations.
This stringing machine is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the machine
by a person responsible for their safety.
Make sure the stringing machine is always turned off before cleaning it or
servicing one of its components. Unplug the power cable from the mains socket.
Never wash the machine using water, a hose or high-pressure cleaning.
Cleaning and maintenance should be done only as detailed in this manual
or at www.wilson.com/baiardo
Assembling the Machine
To assemble the machine, follow all steps listed on the included set-up guide in order.
To acquire a new or missing set-up guide go to www.wilson.com/baiardo to download a copy.
All parts are shown in the set-up guide. Contact your Wilson representative immediately
if any parts are missing.
All tools for assembly are included.
Some steps require two people as noted in the set-up guide.
Use EXTREME caution until fully assembled.
2.1 PARTS
3.1 ASSEMBLING
3
4
1
3
2
5
6
7
10
8
9
12
11
13
14
16
17
19
15
21
22
25
25
26
26
23
24
20
18
Description of Parts
Turntable
1.
Turntable Brake
2.
Turntable Friction On/Off
3.
Outer Support Arms
4.
Inner Support Arms
5.
Puller
6.
Motor Housing
7.
Touch Screen & Electronics Box
8.
Tool Tray
9.
Phone Tray
10.
Safety Cover
11.
Vertical Column
12.
Floor Plate
13.
Leveling Adjustments
14.
Hex Wrench Set
15.
Starting Clamp
16.
Cutter
17.
Awl
18.
Pliers
19.
Power cord
20.
Clamps
21.
Wire Cover
22.
Inner Support Pads
23.
Decorative Cover
24.
Description of Parts
Badminton
Inner Support Arms
25.
Badminton Adapters
26.