Wilson Electronics Alexandria XLF, Owner'S Manual

Page: 47 / 94

s
e C T i o n
4 . 2 – g
e o m e T r i C
T
i m e
d
o m a i n
a
l i g n m e n T
47
W i l s o n A u d i o S p e c i a l t i e s
Tables in Section 8. By measuring the ear height and the distance from the speaker to the
listening position, you will be able to align the system for your listening position.
Alignment Procedure
Each upper modules’ rear spike rests in a specific numbered indent that determines
its individual propagation delay position within the modular array. Each alignment plate
contains numbered indents, numbered 1 to 33 (see Figure 14). The alignment tables con-
tain the information for positioning each module in the array, determined by the indent
in which the rear spike rests. The table also contains information on the appropriate
length spike to be used in the rear of the module. Determine the alignment of each upper
module as follows:
Identification of Alignment Spikes and Tether Bolts
1. Repeat each step of this procedure on the left and right channels simulta-
neously.
2. Remove the Propagation Delay Tables from Section 8 in this booklet and
place them close by
for easy reference.
This information is
also contained in the
Wilson Audio Appli-
cation, available on
Apple iTunes.
3. Make sure that you
are in your intended
listening position.
4. While sitting, have
someone measure
your ear height from
f
igure
14 - A
lignment plAte with Spike detentS