7
8
Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: [email protected] Hours: 7am to 6pm MST.
Understanding the Signal Booster Lights
Power Indicator Light
Shows green when the unit is turned on .
Signal Indicator Light
A green light indicates normal operation .
An orange light indicates overload from the cell tower . The signal booster has
temporarily shut down and will automatically reset .
A red light indicates that oscillation has been detected . The inside and outside
antennas are too close to one another . Increase the antenna separation distance,
then remove and replace the DC power cable to reset the light . If it still shows red,
repeat the procedure .
Power Indicator Light
(located on the side)
Signal Indicator Light
(located on the back)
