3
4
Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: [email protected] Hours: 7am to 6pm MST.
Installing a Wilson Electronics Signal Booster
Warning:
Do not plug in the DC power
supply until the outside and inside antenna
cables are attached to the signal booster .
!
Select a location to install the signal booster
that is away from excessive heat, direct
sunlight or moisture and that has proper
ventilation .
Recommended installation locations are:
•
Under the seat
•
Under the dash
Run the cable from the outside antenna and
attach it to the FME-Male connector labeled
“outside antenna” on the signal booster .
Attach the inside antenna cable to the FME-
Male connector labeled “inside antenna” on
the signal booster .
