1
Contact Wilson Electronics Tech Support with any questions at 866-294-1660
Or email: [email protected] Hours: 7am to 6pm MST.
2
Installation Instructions for the Following Wilson Electronics Signal Boosters:
Mobile Wireless Single Band Cellular Signal Booster
Model #801101
FCC ID: PWO824WV
IC: 4726A-824WV
Mobile Wireless Single Band iDEN Signal Booster
Model #804002
FCC ID: PWO806WV
IC: 4726A-806WV
The term “IC” before the radio certification number only signifies that
Industry Canada technical specifications were met .
Inside this Package
How it Works
Your new Wilson Electronics signal booster has been carefully engineered to significantly
improve the performance of your cell phone or cellular data card in mobile applications .
Together with an outside antenna (sold separately), the signal booster’s state-of-the-art
technology is designed to increase your signal up to 10 times, reduce disconnects and
dropouts, and increase data communication rates needed for 3G technologies .
The outside antenna will collect the cell tower signal and send it through the cable to the
signal booster . The signal is then boosted and sent to the inside antenna . Your cell phone
or data card then communicates with the improved signal . When the cell phone or data card
transmits, the signal goes through the inside antenna, is boosted by the signal booster and
broadcast back to the cell tower through the outside antenna .
Wilson Electronics manufactures a wide variety of antennas to help you customize your
signal booster for your specific application . Several are shown below . See your dealer or
visit www .wilsonelectronics .com .
Wireless
Signal Booster
DC plug-in
power cable
NMO
Mount
301104
Magnet
Mount
301103
Trucker
Mount
301101
Mini
Magnet
301113
Marine
Antenna
301130
Low-profile
antenna
NOTE:
Use of this signal booster
with an antenna gain higher than
5 .12 dBi is in violation of FCC
regulations for which the
offender is fully liable . All
Wilson mobile antennas are
5 .12 dBi or less in the 800
MHz band .
