
1
2
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
Select a location to install the signal booster that is away
1 .
from excessive heat, direct sunlight, moisture and has proper
ventilation . Do not place the signal booster in an air-tight
enclosure .
Select a location on the roof of the building to install the outside
2 .
antenna . Use a cell phone in test mode to find the strongest signal
from the cell tower . Visit
www.WilsonElectronics.com
to find test
mode function for your particular cell phone or see page 8 .
Select a location for the inside antenna, preferably in the
3 .
center of where the signal needs to be amplified . A minimum
separation distance (combined vertical/horizontal) of 15
feet is necessary for operation . If the inside coverage is not
sufficient you may need as much as 50 feet of separation . See
installation diagram on pages 3 & 4 .
Run the outside antenna cable to the signal booster and attach
4 .
it to the connector labeled “outside antenna” on the signal
booster . Run the inside antenna cable to the signal booster
and attach it to the connector labeled “inside antenna” on the
signal booster .
Before powering up the signal booster, verify that both the
5 .
outside antenna and the inside antenna are connected and
check that all connections are tight . Lightning surge protection
is recommended for all in-building installations . See page 7 .
Note:
Be careful when plugging the connectors in so as not to
bend the center pins on the connectors.
See page 10 for more
information .
The Signal Booster has been packaged with the gain control
6 .
knobs adjusted to the highest gain position . If one or both of
the lights are not green please refer to pages 13 &14 .
Warning:
7.
Connecting the signal booster directly to a cell phone
with use of an adapter will damage the cell phone and the
signal booster .
Quick Install Overview
See Installation Diagram on pages 3 & 4 . Contact Wilson Electronics
Technical Support Team with any questions at 866-294-1660 .