manualshive.com logo in svg

Wilson Electronics 271265, Installation Manual, Page: 1 / 20

Share
Download
Wilson Electronics 271265 Installation Manual Download Page 1

Wilson

®

         Electronics, Inc.

Contents:

How it Works  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 1

Quick Install Overview  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2

Installation Diagram  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3

Selecting a Direction for the Outside Antenna  .  .  .  .  .  .  .  . 5

Finding the Strongest Signal  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 8

Installing the Inside Antenna  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9

Installing a Wilson Electronics Signal Booster .  .  .  .  .  .  .  10

Powering up a Wilson Electronics Signal Booster  .  .  .  .  .11

Understanding the Signal Booster Lights   .  .  .  .  .  .  .  .  .  . 13

Warnings  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 15

Signal Booster Specifications  .  .  .  .  .  .  .  .  .  .  .  . Back Cover

Note: 

This manual contains important safety and operating information . Please read and 

follow the instructions in this manual . Failure to do so could be hazardous and result in 

damage to your signal booster .

Adjustable Gain

 

800/1900 MHz In-Building 

Wireless Smart Technology   

™

 

Signal Booster

DB Pro

™ 

Installation

Guide

 DB Pro™

Signal Booster

Summary of Contents for 271265





















Reviews:

No comments