WILSON AUDIO TuneTot, Installation And Care Manual

Page: 13 / 36

S e c t i o n 2 . 2 — R e f i n i n g t h e P o s i t i o n O f T u n e T o t
13
W i l s o n A u d i o S p e c i a l t i e s
spikes into rear two receptacles.
5. If the distance from the listener’s ear to the floor is less than
the distance from the floor to TuneTot (the listener is posi-
tioned below TuneTot), then install the adjustable spikes into
the rear of TuneTot’s two receptacles, and the two AA spikes
into the front two.
6. At this point, leave the nuts on the Adjustable spike loose
enough to allow the spike to be adjusted freely by hand.
Section 2�2—Refining the Position Of TuneTot
Finding the Correct Position
TuneTot benefits from fine tuning both side-to-side as well as front-to-back
tuning, within the constraints and limits of the shelf.
TuneTots should be “toed-in” directly toward the listener, such that, from
the seated position, the listener sees only a small portion of the inside of each
cabinet.
Note: Please note that TuneTot’s spikes are somewhat sharp. Wilson sup-
plies spike pads that optionally sit beneath the spike if there is a need to
protect the surface below.
Right Channel with little “toe.”
Right Channel with correct “toe.”