WILSON AUDIO TuneTot, Installation And Care Manual

Page: 15 / 36

S e c t i o n 2 . 4 — L e v e l i n g T u n e T o t
15
W i l s o n A u d i o S p e c i a l t i e s
relaxed as he/she would be when listening to TuneTot.
3. View the reveal of the top plane of TuneTot’s cabinet.
4. If the there is too little reveal and the Adjustable spikes are
installed in the front receptacles, then decrease the length of
the spikes.
5. If the there is too little reveal, and the Adjustable spikes are
installed in the rear receptacles, then decrease the length of
the spikes.
6. If there is too much reveal and the Adjustable spikes are in-
stalled in the front receptacles, then increase the length of the
spikes.
7. If there is too much reveal and the Adjustable spike are in-
stalled in the rear receptacles, then decrease the length of the
spikes.
8. Repeat this process until there is an appropriate amount of
reveal for each speaker. (See illustrations to the left.)
Section 2�4—Leveling TuneTot
1. Check the solidity of TuneTot on its spikes. If one of the Adjust-
able spikes is out of level, TuneTot will rock.
Too much reveal
Correct reveal