WILSON AUDIO TuneTot, Installation And Care Manual

Page: 31 / 36

S e c t i o n 4 . 2 — T u n e T o t G r i l l e
31
ISOBase is correctly placed with the elongated indents that are further from the
base’s edge placed toward the front of TuneTot.
Follow the same procedures in Section 2 for placement, time-domain cor-
rection, and leveling as you would without the ISOBase.
Section 4�2—TuneTot Grille
For those listeners who prefer a grille, one is available for TuneTot. Its low
diffraction frame is individually milled from solid billets of ultra-low-resonance
X-material. Acoustically transparent fabric (available in six colors) is meticulously
hand stretched onto each composite frame.
The grille is installed by aligning the four pins to the four receptacles on the
front baffle of TuneTot and gently pushing in until it is secure against the front baffle.
Section 4�3—TuneTot Driver Ring
Many Wilson owners prefer to listen without the grille attached. For these
installations, Wilson designed an optional aluminum ring, which elegantly covers
the mounting hardware securing the woofers. The ring is individually milled and
is beautifully finished in a choice of four anodized colors.
The ring is secured via magnets embedded on its back surface. To install,
line up the magnets with the corresponding bolts in the woofer, and carefully
place the ring in the recess until it is tight against the woofer frame.
W i l s o n A u d i o S p e c i a l t i e s