WILSON AUDIO Alexia Series 2 Installation And Care Manual Download Page 57

Page: 57 / 60

eC T i o n

7�1—W

a r r a n T y

e Ta i l s

W i l s o n A u d i o S p e c i a l t i e s

manual, or has been abused or misused, damaged by accident or neglect or in

being transported, or if the product has been tampered with or service or repair

of the product has been attempted or performed by anyone other than Wilson

Audio, an authorized Wilson Audio Dealer Technician or a service or repair cen-

ter authorized by Wilson Audio to service or repair the product. Contact Wilson

Audio at (801) 377-2233 for information on location of Wilson Audio Dealers and

authorized service and repair centers. Most repairs can be made in the field.

In instances where return to Wilson Audio’s factory is required, the dealer or

customer must first obtain a return authorization. Purchaser must pay for ship-

ping to Wilson Audio, and Wilson Audio will pay for shipping of its choice to

return the product to purchaser. A RETURNED PRODUCT MUST BE ACCOMPANIED

BY A WRITTEN DESCRIPTION OF THE DEFECT. Wilson Audio reserves the right to

modify the design of any product without obligation to purchasers of previously

manufactured products and to change the prices or specifications of any prod-

uct without notice or obligation to any person.

Remedy

In the event that the product fails to meet the above Limited Warranty

and the conditions set forth herein have been met, the purchaser’s sole remedy

under this Limited Warranty shall be to: (1) contact an authorized Wilson Audio

Dealer within the Warranty Period for service or repair of the product without

Summary of Contents for Alexia Series 2





























































Search results

Summary of Contents for Alexia Series 2

Reviews:

Brands by name

Popular brands

WILSON AUDIO Alexia Series 2, Installation And Care Manual

Search results

Summary of Contents for Alexia Series 2

Reviews:

Brands by name

Popular brands