s
eC T i o n
2 �1—u
n C r aT i n g
T h e
a
l e x i a
s
e r i e s
2
17
W i l s o n A u d i o S p e c i a l t i e s
enclosures and are the first components of the system to unpack.
1. With the crate lid facing up, unscrew the wood screws securing
the lid. Remove the lid.
2. Carefully rotate the crate upright so that the Woofer Module
is now vertical. With the Woofer Module’s bottom toward the
floor, reach in and gently roll the Woofer Module out of the
crate, carefully, so as not to hit the Woofer Module on the crate
and scratch the paint.
3. Place the Woofer Module with an odd serial number on the left
side of the room and the Woofer Module with an even serial
number on the right side of the room.
Note: These two woofer enclosures are very heavy and care should be taken
to prevent injury. Roll the Woofer Module with drivers facing forward for
the best stability.
Uncrating the Upper Array
The Upper Arrays are contained in a single crate. Unpack the modules
using the following procedure:
4. With the crate lid facing up, unscrew the wood screws securing
the lid. Remove the lid.
5. The Upper Array crate contains this Installment and Care Guide,
the toolkit, and the spike kit. Remove these.
Summary of Contents for Alexia Series 2
