WILSON AUDIO Alexia Series 2, Installation And Care Manual

Page: 40 / 60

40
a
l e x i a
s
e r i e s
2 i
n s Ta l l aT i o n a n d
C
a r e
g
u i d e
A u t h e n t i c E x c e l l e n c e ™
Section 4.3—Removing the Protective Film
To protect the finish of the Alexia Series 2 during final manufacture, ship-
ment, and setup in your listening room, we have applied a removable layer of
protective film over the finish. We recommend that this film be left in place un-
til the speakers are in their final location in your listening room. Once you have
determined their final position, remove the film by following this procedure:
1. Ensure the speaker surface is room temperature before remov-
ing the protective film.
Note: Removing the protective film when the speaker surface is cold can
damage the paint surface.
2. Slowly remove the film from the top down, large sections at a
time, gently pulling the film downward and outward.
Note: Tearing the film aggressively can damage the paint.
3. Take care in removing the protective film near edges and cor-
ners to prevent paint damage in these areas.
4. The protective film should not be left on the painted surface
for extended periods of time nor exposed to heat sources and
direct sunlight.