WILSON AUDIO Alexia Series 2, Installation And Care Manual

Page: 32 / 60

32
a
l e x i a
s
e r i e s
2 i
n s Ta l l aT i o n a n d
C
a r e
g
u i d e
A u t h e n t i c E x c e l l e n c e ™
1. Locate the binding post labeled “Mid Frequency.”
2. Locate the cable marked “Mid Freq.” This cable exits the top of
the Woofer Module just below the appropriate connector. Con-
nect the RED lug of the cable to the RED (positive) terminal on
the terminal labeled “Midrange.” Connect the black lug of the
cable to the BLACK (negative) terminal.
3. Locate the cable marked “High Freq.” Connect the RED lug to
the RED terminal on the biding post labeled “High Frequency”
on the Upper Array. Connect the black lug of the cable to the
BLACK (negative) terminal.
Note: Please ensure that you do not invert the polarity of the umbilicals in
the Alexia Series 2. Such an inversion will produce entertaining ambient
effects, but destroys the linearity and harmonic structure of the system.