Installation and operating instructions Wilo-Rexa NORM 17
TRANSPORTATION AND STORAGE English
Example: Wilo-Rexa NORM-M50.218DAH280M6
D
Flange connections
D = DN connection
A = ANSI connection
A
Material version
A = standard version
Y = special version
H
Installation type: horizontal
280M
Construction size of standard motor
6
Number of poles for the necessary hydraulics
speed
Alternative type key
Example: Wilo-RexaNorm RE 25.93D-378DAH280M6
RE
Series
25
Size discharge connection e.g. 25 = DN 250
93
Internal performance coefficient
D
Impeller shape
E = single-channel impeller
D = three-channel impeller
378
Impeller diameter in mm
D
Flange connections
D = DN connection
A = ANSI connection
A
Material version
A = standard version
Y = special version
H
Installation type: horizontal
280M
Construction size of standard motor
6
Number of poles for the necessary hydraulics
speed
3.8. Scope of delivery
•
Version:
-
Unit: Sewage pump with fitted standard motor
mounted on baseplate
-
“Bare shaft” version: Sewage pump without
motor and baseplate
•
“Bare shaft” version: Transport shackle built onto
suction port as attachment point
•
Installation and operating instructions:
-
Unit: Separate instructions for hydraulics,
motor and coupling
-
Bare shaft: Instructions for hydraulics
-
CE-declaration
3.9. Accessories
•
Connection cable, sold by the metre
•
External pencil electrode for sealing chamber
monitoring
•
Level control devices
•
Fixation accessories and chains
•
Switchgear, relays and plugs
4. Transportation and storage
NOTICE
lso note all the information regarding transpor-
tation and storage in the operating and mainte-
nance manual for the motor and the coupling!
4.1. Delivery
Upon delivery, check immediately that the ship-
ment is complete and undamaged. If any parts are
damaged or missing, the transport company or
the manufacturer must be notified on the day of
delivery since claims cannot be made afterwards.
Damage to parts must be noted on the freight
documentation!
4.2. Transportation
•
Only use lifting gear which is legally designated as
such and officially approved.
•
The lifting gear must have sufficient bearing
capacity so that the product can be transported
safely.
•
The lifting gear must be suitable for the condi-
tions of use (weather, hooking unit, load etc.).
When using chains, these must be secured
against slipping.
•
Mobile equipment for lifting loads should be
used in such a way that it is guaranteed to remain
stable during operation.
•
When using mobile equipment for lifting non-
guided loads, take action to prevent tipping,
shifting, sliding etc.
•
Measures should be taken to ensure that no
person is ever directly beneath a suspended load.
Furthermore, it is prohibited to move suspended
loads over workplaces where people are present.
•
If mobile equipment is used for lifting loads, a
second person should be present to coordinate
the procedure if required (e.g. if the operator’s
field of vision is blocked).
•
The load to be lifted must be transported so that
no-one will be injured if there is a power failure.
Furthermore, if such work is being performed
outdoors, it must be cancelled if the weather
conditions worsen.
•
The personnel must be qualified for the tasks and
must follow all applicable national safety regula-
tions during the work.
•
The pump is delivered by the manufacturer or
shipping agency in suitable packaging. This
normally precludes the possibility of damage
occurring during transportation and storage. The
packaging should be stored safely for reuse if the
product is frequently used at different locations.
Note the additional information in the operating
and maintenance manual for the motor regar-
ding transportation
4.3. Storage
Newly delivered pumps are prepared so that they
can be stored for the following times:
-
Unit: 6 months
-
Bare shaft: 12 months
The pump should be cleaned thoroughly before it
is put into temporary storage!
Note the additional information in the opera-
ting and maintenance manual for the motor and
coupling regarding storage.
The following should be taken into consideration
for storage:
Summary of Contents for Wilo-Rexa NORM
