background image

ENGLISH

5

WILLIAMSJETTENDERS.COM

ENGLISH

Williams Jet Tenders consider the safety 

of our customers of great importance. We 

recommend people using our products 

exercise care and common sense, and 

comply with the safety information within the 

Owner’s Handbook. 
Always obey the safety labels fitted to the 

tender and replace them if they become 

unreadable.
Be aware of local laws and restrictions and 

never use whilst under the influence of alcohol 

or any substance which may affect your 

judgement. 

This symbol appears on a number 

of labels fitted to the tender. The 

symbol draws your attention to 

the message and refers you to the 

Owner’s Handbook. 

This safety alert symbol appears 

throughout the Owner’s Handbook 

and appears on various labels fitted 

to the tender. It means attention, be 

alert, your safety is involved! Please read and 

abide by the message that follows the safety 

alert symbol.

DANGER

  

Indicates a hazardous situation which, if not 

avoided, will result in death or serious injury. 

WARNING

  

Indicates a hazardous situation which, if not 

avoided, could result in death or serious injury.

CAUTION

  

Indicates a hazardous situation which, if not 

avoided, could result in minor or moderate 

injury.

Safety Information

5

WILLIAMSJETTENDERS.COM

Safety Information 

5

Before Getting Underway 

6

Operators’ and Passengers’ Awareness, 
Water Sports 

7

Operating your Tender 

8

Warning Label Locations, Classification 

10

General Specifications, Engine  
Specifications 

11

General Layout, New Engine Break-in  
Period 

12

Controls and Instrument Cluster, Fuelling 

13

Before Use, Safety Check, Power Limit 
Switch, Checking the Oil Level 

14

Starting Procedure, Warning Lights 

15

Engine Bay 

16

Exhaust System Flushing 

17

Electrical Cable Colour Coding,  

Fuel System, Lifting the Minijet,  
Reboarding the Minijet 

18

Quick Release Steering Wheel Operation,  
Routine Maintenance 

19

Full Inspection Maintenance Table 

20

Winterising/Dry Storage 

22

Limited Warranty 

23

Contents

Summary of Contents for Minijet

























Reviews: