ENGLISH
20
WILLIAMSJETTENDERS.COM
Full Inspection Maintenance Table
Please use this section for servicing guidance and the Rotax engine manual for all engine-related
serviceable items.
These tasks require basic mechanical and/or electrical knowledge. Please refer to a qualified
engineer if you are not confident in carrying them out.
First
50 hours
or 1 year
Every
100 hours
or 1 year
Every
200 hours
or 2 years
To be
carried
out by
Engine
Engine oil and filter
Replace
Replace
1
Repair Shop
Rubber mounts
Inspect
Inspect
Repair Shop
Corrosion protection (spray
an anticorrosion lubricant
to metallic components in
engine compartment)
Lubricate
(Every 10 hours
in salt water
use)
Operator
PTO Seal and Sleeve
Replace
2
Repair Shop
Exhaust system
Exhaust System
Inspect
Inspect,
Clean
3
Operator/
Repair Shop
Exhaust
system flushing
Clean
1, 3
Operator
Cooling system
Hoses and fasteners
Inspect
Inspect
Repair Shop
Coolant
Inspect
Inspect
Replace
Repair Shop
Fuel system
Throttle Body
Inspect
Inspect
Repair Shop
Fuel Lines, connections,
pressure relief valve and
fuel system leak test
Inspect
Inspect
Repair Shop
Engine management system
Fault Codes
Inspect
Inspect
Repair Shop
Air intake system
Air Filter
Inspect, replace
if required
Repair Shop
1
At storage period or after 100 hours of use whichever comes first.
2
Replace at 200 hours of use,
irrespective of the number of years.
3
Daily flushing in salt water or foul water use.