A WILKINSONSTAR PRODUCT 02-18 ISSUE 1
Machine panel functions
1
DIGITAL METER—Displays parameters during set up and actual values when welding. Also used to
display any error message codes
2
Overheat LED. Will be lit when the machine enters overheat conditions. Welding will cease whilst
this LED is lit.
3
Mains LED. This will be lit when mains supply is connected and the mains switch is on.
4
Welding mode selection zone. Welding mode selection zone contains welding mode indicators and
selection key. Welding modes include DC TIG, Pulse TIG, DIC MMA(TIG400 has no pulse TIG func-
tion). Press the welding mode selection key to choose the according welding mode. The welding
mode being selected LED will be lit when selected and there is welding current flowing.
5
Adjustment knob. Used to select and adjust parameters
6
Parameter selection area. Using the adjustment knob highlight the LED of the parameter to be
adjusted in the selection area
7
Arc force LED. When selected this will be lit and the arc force parameter can be adjusted.
8
HF / Spot LED
9
Use the selector to choose the mode 2T, 4T or Spot
10
Frequency LED. When lit the pulse frequency can be adjusted
11
Pulse duty LED . When lit the time on peak current during each pulse can be adjusted.