A WILKINSONSTAR PRODUCT 02-18 ISSUE 1
TIG WELDING
Connect the TIG torch connector to the “-” quick socket on the machine panel, and tighten it clockwise.
Connect the switch plug on the TIG torch to the corresponding socket on the machine panel, this is a
quick connector so it is not necessary to turn the plug.
Insert the quick plug on the work return cable into the “+” quick socket on the machine panel, and
tighten it clockwise. Clamp the workpiece with the work clamp at the other end of the earth cable.
Connect the gas hose of the TIG torch to the quick connector on the machine front.
Connect the gas hose to the gas inlet on the back panel of the machine. The other end of the supply
hose connects to the gas regulator on the cylinder.
OPERATION
DC TIG
Select the DC TIG mode by pressing the welding mode selecting key,
Select the 2T mode by pressing the operation mode selecting key.
Select the pre-flow time setting
function by pressing the welding
parameter selecting key, and set the
pre-flow time.
Select the initial current setting
function by pressing the welding
parameter selecting key, and set the
initial current.
Select the upslope time setting
function by pressing the welding
parameter selecting key, and set the
upslope time.
Select the welding current setting
function by pressing the welding
parameter selecting key, and set the
welding current.