Wilfa ICP-1800B, Operating Instructions Manual

Page: 50 / 54

Engl
ish
10
Error code Cause Suggestion/solution
E0 No pot/pan; unsuitable
cookware Use suitable cookware
E1 Electrical malfunction/
Short circuit Contact the manufacturer or a
competent after-sales service
E2 Temperature sensor
damaged Contact the manufacturer or a
competent after-sales service
E3 Voltage too high Have your power supply checked;
Unplug the appliance, wait about
2min. and plug in the appliance
again
E4 Voltage too low Have your power supply checked;
Unplug the appliance, wait about
2min. and plug in the appliance
again
E5 Temperature on the
ceramic plate too high;
pot/pan empty;
pot/pan has too high
temperature Wait a few minutes and let the
plate or pot/pan cool down
E6 Cooling or exhaust fan
damaged Contact the manufacturer or a
competent after-sales service;
Clean the louvers on the housing
and restart the appliance
ERROR CODE TABLE
CLEANING
• Before cleaning, unplug and wait for the appliance to cool down.
• Wipe the housing only with a moistened cloth or sponge.
• Do not clean with any abrasive scouring pad or steel wool, as this will
damage the finish. The ceramic plate can also be cleaned with a damp
cloth or sponge. Use a commercially available special cleansing agent for
ceramic glass hobs and induction cooking plates to remove stubborn stains
or discolorations on the plate.
• Do not immerse in water or any other liquid.