18
Removal and Disposal
Lighting
•
At the end of its working life it is necessary to uninstalled and disassemble the burner.
•
ALL DISASSEMBLY MUST BE PERFORMED BY PERSONNEL WHAT FIELD SERVICE PERSONNEL AND IN
COMPLIANCE WITH SAFETY STANDARDS.
•
Therefore it is mandatory that during disassembly to wear personal protective equipment:
•
After dismounting the burner should be broken into components and dsiposed of in a recycling facility.
Lighting of the area must comply with the laws in force where it is installed . To ensure good visibility and to
allow the clear reading of the control panels, a value of illumination of not less than 400 Lux is
recommended.
Summary of Contents for E-1 Series
