Wildwood E-1 Series, Operation And Installation Manual

Page: 9 / 33

9
with the exact voltage rating.
•
The user must ensure that the installation complies with the local regulations in force. The equipment should be
installed only by qualified personnel who must comply with the safety regulations in force in the place of installation.
Every ordinary maintenance operation (for as the gas supply pipe) and maintenance (any adjustment to another gas)
must only be carried out by qualified persons.
•
Before starting the burner make sure that nothing blocks the air flow to the burner and the burner's entry is not in
any way blocked.
•
The burner may only be used with the gas specified on the name - plate unless the user follows written instructions
from Vamparossa or its Authorized Agent on how to convert the burner to alternate gas for which the unit has been
tested.
•
If necessary check inlet and manifold gas pressure using a pressure gauge . See Technical Information table for cor-
rect setting.
•
The oven door must not be closed while the burner is in operation
•
The appliance and its individual shut - off valve must be disconnected from the gas supply piping system during
pressure testing of that system when the test pressure is greater than 0.5 psi .
•
Check that all gas taps are open, bleed the gas pipe if necessary.
•
Consult the wiring diagram of the electrical board, if there is one, for the specifications of the supplied power.
Before ignition take these precautions
(continued)