3
Read this before you begin installation:
The installation must conform with local codes or, in the absence of local codes, with the
Standard for the Installation of Domestic Gas Conversion Burners, ANSI Z21.8, and the Na-
tional Fuel Gas Code, ANSI /223.1, or the CAN/M
-
13149, Installation Codes.
The appropriate burner size should be selected according to the burner sizing chart.
Do not allow unauthorized personnel to work on the burner.
The burner must only be incorporated into an oven of a domed structure constructed of
refractory clay or firebrick as a heating appliance for the oven.
The burner must be protected from air movement of more than 3 mph.
In order to avoid variances in pressure, the burner must draw air from the same source as
the oven chamber.
The burner may not be started or operated unless fully and correctly installed.
The appliance must be installed in a well ventilated place. For proper combustion a
minimum area of 4 square feet is required in area below burner.
If flammable panels used for lining, use insulating material and strictly respect the
ventilation in the upper surfaces. Parts sealed by the manufacturer or its agent cannot be
adjusted by the installer and the user
Vamparossa reserves the right to update the production and manuals without having to up-
grade the production and previous manuals. Customer service is available to provide upon
request, information about updates Vamparossa has made on burners.
You'll receive these parts:
Burner
Flange with sleeve
Control box 110v
Transformer 110v to 220v
Regulator Pietro Fiorentino F30051
Adapter
For installation you'll need these tools:
Heavy duty drill
Core bit for sleeve
Drill bit for fixing screws
Fixing screws (self
-
tapping or anchor bolts)
Screwdriver and adjustable wrench
PFTE tape
Reciprocating saw
Ensure the burner you select is the right size for your oven:
24"
28"
32"
36"
40"
44"
48"
52"
56"
60"
64"
68"
72"
E
-
1
E
-
2
E
-
3
Summary of Contents for E-1 Series
