www.wildviewcam.com
Toll Free 888-‐304-‐6125
8
BATTERY AND MEMORY INSTALLATION
Your Wildview Digital Scouting Camera is designed to operate using two
different types of battery power options.
Batteries “C” cell
The internal battery compartment accepts 4 “C” cell batteries. Be sure to use
high quality brand name alkaline batteries. Install batteries with correct
polarity (+/-‐) as noted inside the battery compartment.
12V Lead Acid External Battery
The camera is equipped with an external power jack designed to accept a
barrel plug cable that attaches to a sealed lead acid battery. (Sold separately).
This will enhance the camera’s field life.
Battery cable and complete 12V
Lead Acid battery kits are available wherever Wildview scouting cameras are
sold, or call toll free 888-‐304-‐6125. Only Wildview external battery
accessories are recommended.
1.
Make sure camera is in the
OFF
position.
2.
Insert the external battery barrel plug into the DC 12V jack on the
bottom of camera housing.
WARNING:
Do not use different Voltage lead acid battery other than the
one specified in this section. Doing so will damage the camera and will
void the warranty.
WARNING:
ALWAYS
have the camera in the
OFF
position when installing
or removing batteries and memory card. Removing batteries or memory
card while the camera is ON it may damage the camera.
