www.wildviewcam.com
Toll Free 888-‐304-‐6125
11
SETUP AND PROGRAMMING
When the camera is first turned on, the internal LCD screen displays the
camera status. The following information is present on this screen.
Definitions
•
Cam:
To set which mode you want the camera to be in.
Ø
TEST = Test mode
Ø
OFF = Power Off mode
Ø
ON = Active Passive Infrared mode / Power On mode
•
Time out:
To set the amount of time the camera will sleep between PIR
triggering.
Ø
20s = 20 seconds
Ø
1m = 1 minute
Ø
5m = 5 minutes
Ø
10m = 10 minutes
•
Resolution:
The resolution selection is set at 2.0 Megapixels.
Ø
High (HI) = 2.0 Megapixels
Ø
Low (LO) = 0.3 Megapixels
