www.wildviewcam.com
Toll Free 888-‐304-‐6125
13
Programming your Wildview Camera
NOTE: The following setting must be performed before you turn on the
camera.
1.
Select the time out interval by sliding the
TIME OUT
toggle switch to the
desired preset time interval in minutes.
2.
Select the resolution setting by sliding the
RESOLUTION
toggle switch to
the desired resolution setting.
3.
Select the capture mode by sliding the
BURST
toggle switch to the
desired amount of pictures or video you want to capture per triggering.
4.
Turn on the Camera by sliding the
CAM
toggle switch to the
ON
position.
5.
Setting the Date / Time stamp:
a.
Press and hold
[SET]
button for 2 seconds to enter Date / Time
setting mode.
b.
The word TIME and HH will blink. Press
[UP]
or
[DN]
button to
adjust the hour.
c.
Press
[SET]
button to enter minute setting.
d.
The word TIME and MM will blink. Press
[UP]
or
[DN]
button to
adjust the minute.
e.
Press
[SET]
button to enter the month setting.
f.
The word DATE and MM will blink. Press
[UP]
or
[DN]
button to
adjust the month.
g.
Press
[SET]
button to enter date setting.
