booster for self-testing. For a multiple booster application, only one transmitter will be required, other rest
transmiters will not be used and keep them in the packing. Remember to uninstall a battery from any unused
transmitter. Just pay attension to the coding on all boosters is exactly same as the transmitter.
Connection for Difference Devices
There are a several applications that this booster will support. Please refer the connections as below:
1.
Work with an Invisible (Black) IR Camera: (Fig.4)
Snap the transmitter on the belt and adjust the gooseneck
sensor. Then adjust the IR gooseneck sensor head face to the
IR light source like
(Fig.4)
in order to be able for sensing
camera shooting event. Do not apply with any other accessaries
like item #6; #7
2.
Work with a Visible IR Camera (Fig.3)
In order to upgrade a visible night vision camera to be totally
invisible camera, You need to use the attached two accessories
item #6+ #7 from the above packing list. Make a hole
(Reserved with 3 positions on the shielding sheet) and cut a
proper size depend on fitting for your camera IR lens. Then place the sensor holder through the hole and put
the sheet over the IR Light lens to block RED glow completely and make sure you will not see any RED glow
from outside except allow a light source goes through the sensor holder #6. Put the gooseneck sensor into the
holder after snapped it on the belt. See
Fig.3
3.
Work with an Extension Wired IR Boosters: