Page 10
The information contained in these documents is confidential, privileged and only for the information of the intended recipient and
may not be used, published or redistributed without the prior written consent of Wildlife Computers.
2.
Screw on the coaxial cable (Figure 5).
Figure 5
3.
For all antennas, fit an earth wire from the terminal on the lightning arrestor to under the
washer of the antenna mounting bracket (Figure 6).
Figure 6
4.
Wrap the lightning arrestor and the N-type connectors with PVC tape. Be sure to leave the
drain hole(s) at the bottom of omni-directional antenna clear (Figure 7).
