Page 13
The information contained in these documents is confidential, privileged and only for the information of the intended recipient and
may not be used, published or redistributed without the prior written consent of Wildlife Computers.
1.
Now is the time to adjust the direction of the antennas. If they are not at the correct angles,
remove the mast from the base, loosen the antenna bolts and change the angle of the
antennas.
2.
Once the antennas are pointing in the desired direction, tighten all six tripod nuts and bolts
and ensure all the tripod fittings are tight.
3.
Check the mast is vertical using a spirit level.
Enclosure Mounting
Most Motes will have two enclosures, a Mote box and a battery box. Mount the Mote box on the lugs
as shown in Figure 10.
Figure 10—Enclosure mounting tabs
Next, fit the ‘U’ bracket to the top tripod leg as shown in Figure 11.
