24
INSTALLATION
INSTRUCTIONS
Edge Trim
Installaon
3.9.1
The
Ravel 750 Edge Trim
is supplied with the appliance. Remove this trim and
place somewhere that damage cannot occur whilst preparing the installaon.
The appliance is already prepared for installaon of this trim, with the excepon of
the two vercal side wings. These wings allow the
Ravel 750 Edge Trim
to be
screwed to the appliance to hold it securely in the required posion. To fit these
vercal side wings 6 knockouts must first be removed to allow for screw fixings, 3
on each side. The diagrams below show these knockout posions. The side
knockouts allow the fixing of the two side wings.
Fit the two side wings as shown below. Note the fine slits at the top and boLom of
the side plates, these slits allow the
Ravel 750 Edge Trim
to be fixed in mulple
posions depending on the thickness of the wall lining, allowing the trim to be held
ghtly against the wall surface.
The appliance is now ready to accept the
Ravel 750
Edge Trim
once the appliance has been installed.
Removal of the Ravel 750 Edge trim requires the
removal of the inner 4 screws. Then simply ease
the trim forwards as it disengages from the upper
support brackets.
