34
USER
INSTRUCTIONS
Place the volcanic rock on top of the centre burner as shown. Ensure a 4-5 mm gap is le
between each piece. Then using
half
of the glowing ember wire supplied, ruffle between
fingers to make it loose, about 20mm wide and long enough to cover the volcanic rock then
align over the rock as shown. Ensure no wire is placed within 25mm of the pilot assembly.
Retain the other half of the wire for replacement at annual service.
Fuel Bed
Place Log A as shown in the picture below.
Place Log B onto the le raised burner as shown below, ensuring it fits securely.
