19
Lighting Instructions for your Grill
Using the Grill’s Built-In Ignition System:
1. Open the hood.
2. Keep your body, arms and face as far away from the burners
and cooking surface as possible.
3. Select the burner that you want to ignite. Depress and rotate
the knob corresponding to that burner counter-clockwise to
the “High” position.
a. As you are nearing the “High” position, you will
notice the valve getting tougher to turn. This is
the spring inside the valve building up energy to create the spark. Once you hear a click, the igniter has
fired the spark for that burner.
b. Do not turn the knob too fast, as you need the gas to travel into your manifold, then to the valve and
finally into the burner where it will meet the spark from the igniter (at the front of the burner).
Conversely, if you turn the knob too slowly, you can cause a build-up of gas in the grill and create
a large flash when it ignites.
4. If the burner does not ignite on the first attempt, try again immediately but be very aware of any gas
building up inside the grill.
a. If the grill does not light after three consecutive attempts, turn the knob to the “Off” position,
keep the canopy open, and allow the grill to clear of any built-up gas for at least 5 minutes
before starting the process again.
5. If at this point the grill will still not ignite, contact Wildfire Customer Service at 602-344-4840, for further
assistance to troubleshoot your grill.
REAR
BURNER
RIGHT
BURNER
LEFT
BURNER
LIGHTS
POWER
REAR
BURNER
CENTER
BURNER
LEFT
BURNER
LIGHTS
POWER
RIGHT
BURNER
REAR
BURNER
LEFT
CENTER
BURNER
LEFT
BURNER
LIGHTS
POWER
RIGHT
CENTER
BURNER
RIGHT
BURNER
30"
36"
42"
Summary of Contents for Ranch Pro WF-PRO30G-RH Series
Page 28: ...27...
