© Wikora GmbH
Page 4
Status: 27.04.2015
Errors excepted.
2.3 Fastening set “flat roof mounting – horizontal installation – roof angles from 30-60°
A basic kit (for 1-2 collectors) and an extension kit (for 1 collector) are offered for the horizontal installation of WIKOSUN 2010 /
2510. The basic kit consists of two carriers comprising angle sections with an adjustable tilt angle (30/45/60°), two back bars
comprising flat sections, and a screw set.
The extension kit consists of a carrier comprising angle sections with an adjustable tilt angle (30/45/60°), a back bar comprising
a flat section and a screw set.
Fastening set
Content
Basic kit for 1 collector
WIKOSUN 2010 / 2510
ST-BFS-1FHG
2 Angle sections aluminum 40 x 40 mm, s = 4 mm, l = 1100 mm
2 Angle sections aluminum 40 x 40 mm, s = 4 mm, l = 1250 mm
4 Angle sections aluminum 35 x 55 mm, s = 8 mm; l = 50 mm
2 Flat sections aluminum 40x5 mm, l = 300 mm, s = 5 mm
2 Flat sections aluminum 40x5 mm, l = 1710 mm, s = 5 mm
15 Hex head screws, stainless steel M8 x 20 mm
15 Hex nuts, stainless steel M8
15 Lock washers M8
Extension kit for 1 collector
WIKOSUN 2010 / 2510
ST-BFS-1FHE
1 Angle section aluminum 40 x 40 mm, s = 4 mm, l = 1100 mm
1 Angle section aluminum 40 x 40 mm, s = 4 mm, l = 1250 mm
2 Angle sections aluminum 35 x 55 mm, s = 8 mm; l = 50 mm
1 Flat section aluminum 40x5 mm, l = 300 mm, s = 5 mm
1 Flat section aluminum 40x5 mm, l = 1710 mm, s = 5 mm
7 Hex head screws, stainless steel M8 x 20 mm
7 Hex nuts, stainless steel M8
7 Lock washers M8
Chart 4: Fastening sets „flat roof mounting“ – horizontal installation
2.4 Profile rail sets / Connectors
Profile rail set
Content
ST-PSS-1V
2 profile rails 35x35x 1200mm, 4 Z-clamps, 4 screws M8x20, 4 screws M8x35, 8 nuts M8, 8 washers,
2 K-profiles
ST-PSS-2V
2 profile rails 35x35x 2400mm, 8 Z-clamps, 8 screws M8x20, 6 screws M8x35, 14 nuts M8, 14 washers, 4 K-
profiles
ST-PSS-3V
2 profile rails 35x35x 3600mm, 12 Z-clamps, 12screws M8x20, 8 screws M8x35, 20 nuts M8, 20 washers, 6 K-
profiles
ST-PSS-1H
2 profile rails 35x35x 1800mm, 4 Z-clamps, 4 screws M8x20, 4 screws M8x35, 8 nuts M8, 8 washers,
2 K-profiles
ST-PSS-1.1H
2 profile rails 35x35x 2400mm, 4 Z-clamps, 4 screws M8x20, 4 screws M8x35, 8 nuts M8, 8 washers, 2 K-
profiles
ST-PSS-V
2 Alu angle180mm, 8 screws M8x20, 8 nuts M8, 8 lock washers
Chart 5: Profile rails - horizontal / vertical installation
2.5 Connection accessories
Connection
accessories
Content
ST-AZV-1FK
1 cross piece 18mmxGi1/2“xGi1/2“xGa ¾“, 1 air vent ½“, 1 sensor pocket ½“, 2 end caps 18mm, 2 copper
gaskets ½“, angle 90° 18mm x Ga3/4“
ST-VZV-1FK
2 DG-fittings 18mmx18mm
ST-AZH-1FK
1 cross piece 18mm x Gi1/2“ x Gi ½“ x 18mm, 1 air vent ½“ 1 sensor pocket ½“, 2 end caps 18mm, 2 copper
gaskets ½“, 1 angle 90° 18mm x 18mm, 2 connecting nipples 18mm x Ga3/4“
ST-VZH-1FK
2 T-piece18mm x 18mm x 18mm, 2 end caps 18mm
Chart 6: Connection accessories - horizontal / vertical installation
